An asphalt driveway is a great investment for your home. Not only does it add value to your property, but it also lasts longer and requires less maintenance than other driveways materials. But how much does an asphalt driveway cost?
If you want to get more information on this matter, we invite you to continue reading as we’re going to get into the details of this topic in today’s article.
Typical Cost Of Asphalt Driveway Installation
The cost of an asphalt driveway depends on a few factors, including the size of the driveway, the materials used, and the labor involved. Typically, an asphalt driveway will cost between $3 and $5 per square foot. For a typical two-car driveway that is 20 feet wide and 40 feet long, this means you can expect to pay between $1,200 and $2,000 for your new driveway.
Of course, the price of an asphalt driveway will also depend on the quality of the materials used and the experience of the installer. If you want a higher quality driveway that will last longer and require less maintenance, you can expect to pay more. But if you’re on a budget, there are still options available that will give you a high-quality driveway at a reasonable price. And if you hire a professional to install your driveway, the cost will likely be higher.
Other Factors Which Can Increase The Price Of The Construction Of The Asphalt Driveway
There are a variety of other ingredients that can be added to the asphalt mix to make the price higher. One such ingredient is fiberglass, which is used to strengthen the asphalt and make it more durable. Another ingredient that can drive the price up is polymers, which help improve the asphalt’s resistance to weathering and fading. Also, adding rubber into the asphalt mix can increase the price of the installation. The rubber helps to bind the asphalt together, making it more durable and less likely to crack. However, this increases the cost of the installation, as the rubber is more expensive than asphalt. Finally, some asphalt driveway contractors may add a sealant to the finished product to help extend its life.
In terms of labor, installing an asphalt driveway is not a particularly labor-intensive job, and therefore the cost of labor should not be a significant factor in the overall price. However, it is worth noting that the size of the driveway will have a direct impact on the amount of time it takes to install, and therefore the cost of labor. Larger driveways will take longer to install and will therefore be more expensive.
Why It’s Still Recommended To Hire A Professional Contractor Even If You’ll Have To Spend More
Although it may be tempting to try to save some money by installing your own asphalt driveway, it’s still usually recommended to hire a professional contractor like the asphalt paving services from BaracoPaving.com. This is because asphalt driveways require a lot of specialized knowledge and equipment in order to be installed properly. If you don’t have any experience installing driveways, there’s a good chance you’ll end up making some serious mistakes that will end up costing you a lot more money in the long run.
What Are The Recommended Dimensions Of The Asphalt Driveway To Make Sure It Will Long Lasting
When it comes to installing an asphalt driveway, one of the most important things to consider is the dimensions. If you don’t have the correct measurements, your driveway could end up being too short or too narrow, which could lead to premature wear and tear.
Ideally, your driveway should be at least 10 feet wide, so that you have enough room to comfortably park your car. If you’re planning on using your driveway for other purposes, such as turning around or backing out, you’ll need even more space. As for length, there’s no hard and fast rule, but a good guideline is to make sure your driveway is at least 20 feet long.
Another important factor to consider is the grade, or slope, of your driveway. If the grade is too steep, rain and snow could collect on the surface, which could lead to slipping and sliding. On the other hand, if the grade is too shallow, water could pool in the middle of the driveway and cause problems when you try to drive over it. The ideal grade for an asphalt driveway is between 1 and 3 percent.
As for the recommended thickness, an asphalt driveway should be at least 2.5 inches thick. However, if you live in an area with extreme weather conditions, such as very cold winters or very hot summers, you may need to go up to 3.5 inches.
The last thing to consider is the type of asphalt mix that you’ll be using. There are two main types: hot mix and cold mix. Hot mix is the more common of the two, and it’s generally best for larger projects, such as commercial parking lots. Cold mix is a bit less durable but is better suited for small jobs, such as residential driveways.
Final Thoughts
Keep in mind that the figures mentioned above are just rough estimates. For a more accurate quote, it’s best to consult with a professional contractor who specializes in asphalt driveways. They’ll be able to take a look at your property and give you a better idea of what it will cost to install an asphalt driveway.
